The ARIENS IKON XD Zero-Turn is a tougher, more durable zero-turn, built to exceed customer expectations.

The IKON is powered by a Ariens engine

FULL TUBULAR FRAME
Industry-leading frame design features large-formed tubular frame rails and minimal welds to support the loads of the machine with unprecedented strength and stability.

COMMERCIAL GRADE DECK
10-gauge steel deck is designed with 14cm (5 1/2”) depth, providing optimal airflow and durability.

BELT TENSION TECHNOLOGY
The self-adjusting belt tension technology keeps belt tension constant, which maximises belt life, minimises wear.

DECK LIFT SYSTEM
Offers effortless adjustment between 13 cutting positions in 6mm (1/4”) increments with a simple, vertical pin selection.

Roll Over Protection System
Frame supports a folding ROPS as standard for added protection for the operator.

PADDED SEAT AND ARM RESTS
High-back seat with additional padding features armrests and integrated seat isolators for greater comfort.

DECK OPTIONS
The ARIENS IKON 42 and ARIENS IKON 52 are available as Side discharge or Mulch.

INTUITIVE CONTROLS
Driven and steered by the rear wheels via two independent transmissions, two control levers are all that’s required  drive, brake, steer and spin on the spot.

The post ARIENS IKON XD WITH ARIENS ENGINE (Part-ex available) INC FREE MULCH KIT/FITTED appeared first on Holden Garden Machinery.

The ZENITH E is built upon the fully commercial Ariens ‘ZENITH’ platform, well known for its strength, durability and cutting performance. Combined with next-generation battery technology, the ZENITH E is a formidable competitor to conventional commercial petrol and diesel zero-turns. It is one of the first battery-powered commercial zero-turn mowers developed by an outdoor power equipment company.

It has all the power and performance of its petrol counterparts without the noise, vibration and exhaust. Coupled with the increased productivity of a zero-turn, it is perfect for commercial operators looking to capitalise on the growing number of ‘green’ contracts.

Fully electric, the ZENITH E’s FusionCore lithium-ion 56v DC battery system has four interchangeable, easily removable, sealed for life batteries, each with a 4kWh capacity. Operators can work with minimum interruption by swapping depleted batteries with fully charged ones in seconds.

Where a mix of charge levels is detected in the four batteries, the patent-pending management system prioritises how the ZENITH E balances power. It will only draw from the full batteries until they reach the same level as those with less charge. Once all four are at the same charge level, the machine will draw power from them equally, thus ensuring consistent power and cutting performance throughout. The system is IP65 rated, sealed from moisture, dust and debris and is safe to use in wet conditions. Batteries can be charged in 12 hours with a standard charger or in just 5.3 hours using an optional quick charger.

The ZENITH E features patent-pending spindle technology. This system is designed to protect the spindle motors from damage in the event the blade strikes a hard object, such as a manhole cover or large rock. The two proprietary hub and wheel electric motors work with a dual reduction planetary gearbox to produce an exceptional level of torque, providing the operator with the same feel and driving experience of a petrol zero-turn.

There are two configurations for the 152cm (60”) deck: side discharge and rear discharge. Both are fabricated from highly durable, 10-gauge steel. The machine boasts 15 cutting positions, easily selected with a vertical pin drop and foot-operated deck lift system. The high-back, full suspension seat with padded armrests offers all-day operator comfort. The frame is an industry-leading design with large formed tubular steel chassis for durability.

The Rollover Protection System (ROPS) is fitted as standard. A range of optional accessories is available including LED lights, beacon light, mulch kit, rapid charger and an off-board charger. The ZENITH E comes with a 5-year/1500 hour warranty with no hour limit on the first two years and a 3-year warranty for the batteries.

The post Ariens ZENITH E appeared first on Holden Garden Machinery.

The ARIENS EDGE Zero-Turn is a tougher, more durable zero-turn, built to exceed customer expectations.

The EDGE is powered by an ARIENS 635cc Twin cylinder engine

FULL TUBULAR FRAME
Industry-leading frame design features large-formed tubular frame rails and minimal welds to support the loads of the machine with unprecedented strength and stability.

STEEL PRESSED DECK
12-gauge steel deck is designed to provide optimal airflow and durability.
Choose from 86cm(34″) or 107cm(42″)

BELT TENSION TECHNOLOGY
The self-adjusting belt tension technology keeps belt tension constant, which maximises belt life, minimises wear.

DECK HEIGHT LEVER
The easily accessible seat-side lever allows operators to adjust the deck height with ease.​

Roll Over Protection System
Frame supports a folding ROPS as standard for added protection for the operator.

HIGH BACK PADDED SEAT 
High-back seat with additional padding and integrated seat isolators for greater comfort.

DECK OPTIONS
The ARIENS EDGE 34 and ARIENS EDGE 42 are available as Side discharge or Mulch.

INTUITIVE CONTROLS
Driven and steered by the rear wheels via two independent transmissions, two control levers are all that’s required  drive, brake, steer and spin on the spot.

Choose from an 86 cm (34 in) stamped deck, or a 107 cm (42 in).

The post ARIENS EDGE (Part-ex available) INC FREE MULCH KIT/FITTED appeared first on Holden Garden Machinery.

The ARIENS APEX has Commercial grade features, making it top of the line in residential zero turn ride on mowers,

The Apex has a 726cc Kawasaki FR691 V-Twin engine

A key feature of the ARIENS Zero turn range is manoeuvring, using left and right hand levers instead of the conventional steering wheel.

FULL TUBULAR FRAME
Industry-leading frame design features large-formed tubular frame rails and minimal welds to support the loads of the machine with unprecedented strength and stability.

COMMERCIAL GRADE DECK
10-gauge steel deck is designed with 14cm (5 1/2”) depth, providing optimal airflow and durability.

BELT TENSION TECHNOLOGY
The self-adjusting belt tension technology keeps belt tension constant, which maximises belt life, minimises wear.

DECK LIFT SYSTEM
Offers effortless adjustment between 15 cutting positions in 6mm (1/4”) increments with a simple, vertical pin selection.

Roll Over Protection System
Frame supports a folding ROPS as standard for added protection for the operator.

PADDED SEAT AND ARM RESTS
High-back seat with additional padding features armrests and integrated seat isolators for greater comfort.

DECK OPTIONS
The ARIENS APEX 48 and ARIENS APEX 52 are available as a Side discharge, Mulch or Rear Discharge.

The post ARIENS APEX (Part-ex available) INC FREE MULCH KIT/FITTED appeared first on Holden Garden Machinery.

The ARIENS IKON XD Zero-Turn is a tougher, more durable zero-turn, built to exceed customer expectations.

The IKON is powered by a Kawasaki FR691 engine

FULL TUBULAR FRAME
Industry-leading frame design features large-formed tubular frame rails and minimal welds to support the loads of the machine with unprecedented strength and stability.

COMMERCIAL GRADE DECK
10-gauge steel deck is designed with 14cm (5 1/2”) depth, providing optimal airflow and durability.

BELT TENSION TECHNOLOGY
The self-adjusting belt tension technology keeps belt tension constant, which maximises belt life, minimises wear.

DECK LIFT SYSTEM
Offers effortless adjustment between 13 cutting positions in 6mm (1/4”) increments with a simple, vertical pin selection.

Roll Over Protection System
Frame supports a folding ROPS as standard for added protection for the operator.

PADDED SEAT AND ARM RESTS
High-back seat with additional padding features armrests and integrated seat isolators for greater comfort.

DECK OPTIONS
The ARIENS IKON 42 and ARIENS IKON 52 are available as Side discharge or Mulch.

INTUITIVE CONTROLS
Driven and steered by the rear wheels via two independent transmissions, two control levers are all that’s required  drive, brake, steer and spin on the spot.

The post ARIENS IKON XD (Part-ex available) INCLUDES MULCH KIT appeared first on Holden Garden Machinery.